ECISS technical committees (or sub-committees) followed by BN ACIER
The following table gives the list of ECISS technical committees (ECISS/TC) and subsequent sub-committees (ECISS/TC../SC), followed by BN ACIER, with the indication of their field of activities and the BN ACIER engineer in charge of the follow-up.
|
Committees and sub-committees |
Field of activities |
Secretary |
BN ACIER engineer |
|
TC 1 |
Mechanical testing |
AFNOR (F) |
|
|
TC 2 |
Physico-chemical and non-destructive testing |
AFNOR (F) |
|
|
TC 6 |
Definition and classification of steels ; definition of steel products |
BSI (GB) |
|
|
TC 7 |
Conventional designation of steels |
UNSIDER (I) |
|
|
TC 9 |
Technical delivery conditions and quality control |
IBN (B) |
|
| TC 10 | Structural steels – Quality requirements | NNI (NL) | J. MENIGAULT |
|
TC 10/SC 1 |
Hollow sections |
BSI (GB) |
|
| TC 10/SC 4 | Sheet pilings | AFNOR (F) | J. MENIGAULT |
| TC 11 | Structural steel sections and hot rolled steel bars for engineering purposes - Dimensions and tolerances | BSI (GB) | J. MENIGAULT |
|
TC 12 |
Structural steels and steels for pressure purposes, flat products – Dimensions and tolerances |
NNI (NL) |
|
|
TC 13 |
Flat products for cold forming |
IBN (B) |
|
|
TC 15 |
Wire rod |
UNSIDER |
|
| TC 19/SC 1 | Reinforcing steels for concrete | FES im DIN(D) | B. CRETON |
|
TC 19/SC 2 |
Prestressing steels |
BSI (GB) |
|
|
TC 21 |
Vocabulary of heat treatment |
DIN (D) |
|
|
TC 22 |
Steels for pressure purposes |
FES im DIN (D) |
|
| TC 23 | Steels for heat treatment, alloy steels, and free-cutting steels | FES im DIN (D) | F. BOISSE |
|
TC 23/SC 1 |
Stainless steels |
FES im DIN (D) |
|
|
TC 24 |
Electrical steel strip and sheet |
FES im DIN (D) |
|
|
TC 26 |
Tinplate and blackplate |
BSI (GB) |
|
| TC 27 | Coated flat products | FES im DIN (D) | J. MENIGAULT |
|
TC 27/SC 1 |
Organic coil coated flat products |
FES im DIN (D) |
|
|
TC 28 |
Steel forgings |
BSI (GB) |
|
| TC 29 | Steel tubes | UNSIDER (I) | P. FALLOUEY |
| TC 29/SC 1 | Tubes for pressure purposes | UNSIDER (I) | P. FALLOUEY |
| TC 29/SC 2 | Linepipes | DIN (D) | P. FALLOUEY |
| TC 29/SC 3 | Fittings | AFNOR (F) | P. FALLOUEY |
| TC 29/SC 4 | Coatings | AFNOR (F) | B. CRETON |
| TC 29/SC 5 | Tubes for the conveyance of aqueous liquids | BSI (GB) | F. BOISSE |
| TC 29/SC 6 | Tube threads and service tubes | UNSIDER (I) | P. FALLOUEY |
| TC 29/SC 8 | Dimensions and tolerances | FES im DIN (D) | P. FALLOUEY |
| TC 29/SC 9 | Mechanical testing | BSI (GB) | P. FALLOUEY |
| TC 29/SC 10 | Non-destructive testing | UNSIDER (I) | B. CRETON |
| TC 29/SC 11 | Tubes for mechanical and general engineering purposes | AFNOR (F) | P. FALLOUEY |
| TC 30 | Steel wires | BSI (GB) | F. BOISSE |